Release : 1.1f 858 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.27 ipv6 ospf transmit-delay
This command sets the estimated time taken to transmit LS update packet over a particular
interface. The no form of the command sets the default transmit delay for an interface.
ipv6 ospf transmit-delay <1-1800>
no ipv6 ospf transmit-delay
Mode
Interface Configuration Mode
Defaults
delay - 1
Example
SMIS(config-if)# ipv6 ospf transmit-delay 10
Related Command
show ipv6 ospf interface – Displays the OSPFv3-related interface information
To Next Page
Loading...
