Release : 1.1f 740 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.32 bgp ecomm-filter
This command allows/filters the ext community attribute while receiving or advertising. The no
form of the command removes the filter policy for the ext community attribute.
bgp ecomm-filter <ecomm-value(xx:xx:..:xx)> <permit|deny> <in|out>
no bgp ecomm-filter <ecomm-value(xx:xx:..:xx)> <permit|deny> <in|out>
Syntax Description
ecomm-value - The extended community value
permit - Allows the route -update with the associated extended community value to pass the
filter test
deny - Denies the route-update with the associated extended community value to pass the filter
test
in - Incoming direction of applied filter
out - Outgoing direction of applied filter
Mode
Router Configuration Mode
Example
SMIS(config-router)# bgp ecomm-filter 01:01:22:33:23:43:44:22 deny
in
BGP Speaker Local AS number must be configured.
Related Commands
router bgp – Sets the AS number of the BGP Speaker
show ip bgp extcommunity – Displays the contents of route/peer/filter/policy ext-community
route tables
To Next Page
Loading...
