Supermicro SSE-G48-TG4 - Lldp Port-ID-Subtype

Release : 1.1f 972 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.11 lldp port-id-subtype
This command configures port identifier type. LLDP port identifier can be any one of the following:
Interface Alias - Interface alias
Port Component - Port component string
MAC Address - MAC address of the switch
Interface Name - Interface name
Locally Assigned - Any user defined local string
lldp port-id-subtype { if-alias | port-comp <string(255)> | mac-addr |
if-name | local <string(255)> }
Syntax Description
if-alias - Interface alias
port-comp - Port component string up to 255 characters
mac-addr - MAC address of the switch
if-name - Interface name
local - Any user defined local string up to 255 characters
Mode
Interface Configuration Mode
Defaults
Interface alias
Example
SMIS(config-if)# lldp port-id-subtype mac-addr
Related Commands
show lldp local – Displays the LLDP interface information.