Release : 1.1f 179 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
7.4 debug ssl
This command sets the given debug levels for SSL and the no form of the command re-sets the
given SSL debug level.
debug ssl ([all] [shut] [mgmt] [data] [ctrl] [dump] [resource]
[buffer])
no debug ssl ([all] [shut] [mgmt] [data] [ctrl] [dump] [resource]
[buffer])
Syntax Description
all - Initialization and Shutdown Messages
shut - Shutdown Messages
mgmt - Management Messages
data - Data Path Messages
ctrl - Control Plane Messages
dump - Packet Dump Messages
resource - Messages related to all resources except Buffers
buffer - Buffer Messages
Mode
Privileged EXEC Mode
Defaults
Debugging is Disabled
Example
SMIS# debug ssl all
Setting all the bits will enable all the debug levels and resetting them will disable all the debug
levels.
Related Commands
show ssl server-cert - Displays SSL server certificate
show ip http secure server status - Displays SSL status and configuration information
To Next Page
Loading...
