Supermicro SSE-G48-TG4 - Ip Igmp Snooping Version

Release : 1.1f 311 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.10 ip igmp snooping version
This command sets the operating version of the IGMP snooping switch for a specific VLAN.
ip igmp snooping version { v1 |v2 | v3}
Syntax Description
v1 - IGMP snooping Version 1
v2 - IGMP snooping Version 2
v3 - IGMP snooping Version 3
Mode
Config-VLAN Mode
Defaults
v3
Example
SMIS(config-vlan)#ip igmp snooping version v2
Related Command
show ip igmp snooping - Displays IGMP snooping information for all VLANs or a specific
VLAN