Release : 1.1f 500 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.4 ip igmp version
This command sets the IGMP version on the interface and the no form of the command sets the
default IGMP version on the interface.
ip igmp version { 1 | 2 | 3}
no ip igmp version
Syntax Description
1 | 2 | 3 - IGMP versions
Mode
Interface Configuration Mode
Defaults
2
Example
SMIS(config-if)# ip igmp version 1
Related Commands
show ip igmp interface - Displays the interface configuration of IGMP
To Next Page
Loading...
