Supermicro SSE-G48-TG4 - Ipv6 Nd Dad Attempts

Release : 1.1f 786 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.12 ipv6 nd dad attempts
This command sets the number of duplicate address detection (dad) attempts. The no form of the
command resets the duplicate address detection attempts to its default value.
ipv6 nd dad attempts <no of attempts (1-10)>
no ipv6 nd dad attempts
Mode
Interface Configuration Mode
Defaults
1
Example
SMIS(config-if)# ipv6 nd dad attempts 5
Related Commands
show ipv6 interface – Displays the IPv6 interfaces
no ipv6 nd suppress-ra – Enables IPv6 router advertisement