Release : 1.1f 731 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.23 bgp cluster-id
This command configures the Cluster ID for Route Reflector and the no form of the command
resets the Cluster ID for Route Reflector.
bgp cluster-id <cluster id value(ip_address)>
no bgp cluster-id
Syntax Description
cluster id value - The cluster Id associated with the route-reflector
Mode
Router Configuration Mode
Example
SMIS(config-router)# bgp cluster-id 10.0.0.1
BGP Speaker Local AS number must be configured.
Related Commands
router bgp – Sets the AS number of the BGP Speaker
show ip bgp rfl info – Displays info about RFL feature
To Next Page
Loading...
