Release : 1.1f 635 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.13 ip rip summary-address
This command sets route aggregation over an interface for all subnet routes that falls under the
specified IP address and mask. The no form of the command disables route aggregation with the
specified IP address and mask.
ip rip summary-address <ip-address> <mask>
no ip rip summary-address <ip-address> <mask>
Syntax Description
ip-address - IP Address of the interface specific aggregation
mask - Subnet Mask
Mode
Interface Configuration Mode
Example
SMIS(config-if)# ip rip summary-address 60.0.0.0 255.0.0.0
This command must not be used with RIPv1 send version.
Auto-summarization overrides interface specific aggregation. Therefore, auto
summarization must be disabled for interface specific route aggregation.
Related Command
show ip protocols - Displays information about the active routing protocol process
To Next Page
Loading...
