Release : 1.1f 648 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.1 router ospf
This command enables OSPF routing process and the no form of the command disables OSPF
routing process.
router ospf
no router ospf
Mode
Global Configuration Mode
Example
SMIS(config)# router ospf
The command no router ospf disables the OSPF Router Admin Status to terminate the
OSPF process.
Related Commands
router-id – Sets the router-id for the OSPF process
network – Defines the interfaces on which OSPF runs and area ID for those interfaces
show ip ospf route – Displays routes learnt by OSPF process
show ip ospf - database – Displays OSPF Database summary for the LSA type
To Next Page
Loading...
