Release : 1.1f 658 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.11 default-information originate always
This command enables generation of a default external route into an OSPF routing domain and
other parameters related to that area. The no form of the command disables generation of a
default external route into an OSPF routing domain.
default-information originate always [metric <metric-value (0-
0xffffff)>] [metric-type <type (1-2)>]
no default-information originate always [metric <metric-value (0-
0xffffff)>] [metric-type <type (1-2)>]
Syntax Description
metric - The Metric value applied to the route before it is advertised into the OSPF Domain
metric-type - The Metric Type applied to the route before it is advertised into the OSPF
Domain
Mode
Router Configuration Mode
Defaults
metric - 10
metric-type - 2
Example
SMIS(config-router)# default-information originate always metric 1
metric-type 1
Related Command
redistribute – Configures the protocol from which the routes have to be redistributed into
OSPF
To Next Page
Loading...
