Release : 1.1f 571 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23 PIMv6
PIMv6 is a portable software implementation of the PIM (Sparse Mode and Dense Mode)
specification, for IPv6 networks. PIMv6 provides support for inter-domain routing between
domains using
PIMv6-SM or PIMv6-DM. It also avoids the performance problems of earlier multicast routing
protocols.
This software provides multicast routing and forwarding capability to a router that runs the IPv6
protocol along with MLD (Multicast Listener Discovery). PIMv6 routes multicast data packets
independent of any unicast routing protocol.
The list of CLI commands for the configuration of PIMv6 is as follows:
set ipv6 pim
set ip pim threshold
set ip pim spt-switchperiod
set ip pim rp-threshold
set ip pim rp-switchperiod
set ip pim regstop-ratelimit-period
set ip pim pmbr
set ip pim static-rp
ip pim component
ipv6 pim rp-candidate rp-address
ipv6 pim rp-static rp-address
ipv6 pim query-interval
ipv6 pim message-interval
ipv6 pim bsr-candidate
ipv6 pim componentId
ipv6 pim hello-holdtime
ipv6 pim dr-priority
ipv6 pim override-interval
ipv6 pim lan-delay
set ipv6 pim lan-prune-delay
no ipv6 pim interface
debug ipv6 pim
To Next Page
Loading...
