Release : 1.1f 570 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
---------------------------
Route Flags S: SPT Bit W: Wild Card Bit R: RPT Bit
Timers : Uptime/Expires
Interface State : Interface, State/Mode
PIM Multicast Routing Table For Component 1
(*, 224,1,0.0) , 00:04:35/--- , RP : 12.0.0.1
Incoming Interface : vlan1, RPF nbr : NULL, Route Flags : WR
Outgoing InterfaceList:
vlan2, Forwarding/Sparse, 00:04:35/---
(12.0.0.30,224.1.0.0) , 00:00:04/00:03:26
Incoming Interface : vlan1, RPF nbr : NULL, Route Flages : S
Outgoing InterfaceList :
vlan2, Forwarding/Sparse , 00:00:04/---
It shows details of the (S ,G) ,(*,G) and (*,*,RP) entries.
Related Command
ip pim bsr-candidate – Sets the preference value for the local interface as a candidate
bootstrap router
To Next Page
Loading...
