Release : 1.1f 573 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.1 set ipv6 pim
This command enables or disables PIMv6 globally.
set ipv6 pim { enable | disable }
Syntax Description
enable - Enables PIMv6
disable - Disables PIMv6
Mode
Global Configuration Mode
Defaults
disable
Example
iss (config)# set ipv6 pim enable
When PIMv6 is globally enabled, the mode will be sparse.
Related Command
show ipv6 pim interface – Displays the PIMv6 interfaces of the router
To Next Page
Loading...
