Supermicro SSE-G48-TG4 - Show Spanning-Tree Root

Release : 1.1f 233 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
9.27 show spanning-tree root
This command displays Spanning-tree root information.
show spanning-tree root [{ address | cost | forward-time | hello-time |
id | max-age | port | priority | detail }]
Syntax Description
Address - Root bridge MAC address
Cost - Cost value associated with the port
forward-time - Root bridge forward time
hello-time - Root bridge hello time
id - Root bridge ID
max-age - Root bridge Max age
port - Root port
priority - Root bridge priority
detail - Displays in detail about the port and bridge. This includes designated Bridge details,
designated port details, timer values, root bridge, etc
Mode
Privileged EXEC Mode
Example
Single Instance:
SMIS# show spanning-tree root
Root ID RootCost HelloTime MaxAge FwdDly RootPort
------- -------- --------- ------ ------ --------
80:00:00:01:02:03:04:11 0 2 20 15 0
SMIS# show spanning-tree root address
Root Bridge Address is 00:01:02:03:04:11
SMIS# show spanning-tree root cost
Root Cost is 2000000
SMIS# show spanning-tree root forward-time
Forward delay is 15 sec