Release : 1.1f 232 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Number of Invalid BPDU Count Transmitted : 0
Port Protocol Migration Count : 1
SMIS# show spanning-tree interface gigabitethernet 0/1 detail
Switch – default
Port 1 [Gi0/1] is Root , Forwarding
Port PathCost 2000000, Port Priority 128, Port Identifier 128.1
Designated Root has priority 8192, address 00:01:02:03:04:21
Designated Bridge has priority 8192, address 00:01:02:03:04:21
Designated Port Id is 128.1, Designated PathCost 0
No of Transitions to forwarding State :1
PortFast is disabled
Link Type is Shared
BPDUs : sent 735 , recieved 1729
SMIS# show spanning-tree interface fast 0/1 restricted-role
Switch – default
Restricted Role is Disabled
SMIS# show spanning-tree interface fast 0/1 restricted-tcn
Switch – default
Restricted TCN is Disabled
Enter each interface separated by a space. Ranges are not supported. Valid interfaces
include physical ports, VLANs, and port channels.
Related Commands
spanning-tree - Properties of an interface - Sets spanning tree properties of an
interface
spanning-tree mst- Properties of an interface for MSTP - Sets the spanning
tree properties of an interface for MSTP
show spanning-tree - Detail - Displays detailed spanning tree information
show spanning-tree - Active - Displays spanning tree information of active ports
clear spanning-tree detected protocols - Restarts the protocol migration process on
all the interfaces
clear spanning-tree counters - Resets all bridge and port level statistics counters
To Next Page
Loading...
