Release : 1.1f 975 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.14 lldp tlv-select dot3tlv
This command configures 802.3 standard tlv transmission on interface. It enables the
transmission of given tlv on any interface.
The no form of this command disables the transmission of given tlv on any interface.
lldp tlv-select dot3tlv { [macphy-config] [link-aggregation] [max-
framesize] }
no lldp tlv-select dot3TLV { [macphy-config] [link-aggregation] [max-
framesize] }
Syntax Description
macphy-config – Enables transmission of MAC and phy configuration and status tlv
link-aggregation - Enables transmission of link aggregation information tlv
max-framesize - Enables transmission of max frame size information tlv
Mode
Interface Configuration Mode
Defaults
Disabled
Example
SMIS(config-if)# lldp tlv-select dot3tlv macphy-config link-aggregation
Related Commands
show lldp local – Displays the LLDP local interface information.
To Next Page
Loading...
