Supermicro SSE-G48-TG4 - Show Mac-Address-Table Count

Release : 1.1f 391 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.42 show mac-address-table count
This command displays the number of MAC addresses present on all the VLANs or on the
specified VLAN.
show mac-address-table count [vlan <vlan-id(1-4069)>]
Syntax Description
vlan - VLAN ID
Mode
Privileged EXEC Mode
Example
Single Instance:
SMIS# show mac-address-table count
Mac Entries for Vlan 1:
--------------------------
Dynamic Unicast Address Count : 1
Dynamic Multicast Address Count : 0
Static Unicast Address Count : 1
Static Multicast Address Count : 1
----------------------------------------
Mac Entries for Vlan 2:
--------------------------
Dynamic Unicast Address Count : 1
Dynamic Multicast Address Count : 0
Static Unicast Address Count : 1
Static Multicast Address Count : 0
----------------------------------------
Multiple Instance:
SMIS# show mac-address-table count switch cust1
Switch - cust1
Mac Entries for Vlan 1:
--------------------------
Dynamic Unicast Address Count : 1
Dynamic Multicast Address Count : 0