Supermicro SSE-G48-TG4 - Show Snmp User

Release : 1.1f 477 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
17.26 show snmp user
This command displays the configured SNMP users.
show snmp user
Mode
Privileged EXEC Mode
Example
SMIS# show snmp user
Engine ID: 80.00.08.1c.04.46.53
User: initial
Authentication Protocol: none
Privacy Protocol: none
Storage Type: nonVolatile
Row Status: active
------------------------------
Engine ID: 80.00.08.1c.04.46.53
User: templateMD5
Authentication Protocol: MD5
Privacy Protocol: none
Storage Type: nonVolatile
Row Status: active
------------------------------
Engine ID: 80.00.08.1c.04.46.53
User: templateSHA
Authentication Protocol: SHA
Privacy Protocol: DES_CBC
Storage Type: nonVolatile
Row Status: active
------------------------------
Related Commands
snmp user - Configures the SNMP user details
show snmp community - Displays the configured SNMP community details