Release : 1.1f 566 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.30 show ip pim rp-static
This command displays the static RP information.
show ip pim rp-static [ComponentId <1-255>]
Syntax Description
ComponentId - Component ID
Mode
Privileged EXEC Mode
Example
SMIS# show ip pim rp-static 2
Static-RP Enabled
CompId GroupAddress Group Mask RPAddress
2 225.1.0.0 255.255.0.0 20.0.0.1
Related Command
set ip pim static-rp – Enables or disables the Static RP configuration Status
To Next Page
Loading...
