Release : 1.1f 131 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.91 reload
This command restarts the switch.
reload [ <switch-id] | all] [force]
Syntax Description
<switch-id] - In stacking, the required particular switch can be restarted by specifying
switch id.
all – Use this option to restart all switches in stacking.
force – Use this option for a forced restart. When you are trying to restart right after a firmware
upgrade of write startup config in stacking environment, you will be prompted to wait to restart the
switch until the files are transferred to all slave switches in stacking. To overwrite this waiting and
restart forcefully, this option is used.
Mode
Privileged EXEC Mode
Example
SMIS# reload
To Next Page
Loading...
