Supermicro SSE-G48-TG4 - Show Ip Ospf Retransmission-List

Release : 1.1f 689 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.37 show ip ospf retransmission-list
This command displays OSPF Link state retransmission list information.
show ip ospf retransmission-list [<neighbor-id>] [vlan <vlan-id (1-
4069)> | <iftype> <ifnum> ]
Syntax Description
neighbor-id - Neighbor router ID
vlan - LSA retransmissions for adjacencies belonging to the VLAN interface
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# show ip ospf retransmission-list
OSPF Router with ID (20.0.0.2)
Neighbor 10.0.0.1, interface vlan1 address 10.0.0.2
Link State Retransmission due in 30 ticks, Queue length 3
Type LS-ID ADV-RTR SeqNo Age Checksum
This value is also used while retransmitting database description and link-state request
packets.
Related Command
ip ospf retransmit-interval – Specifies the time between link-state advertisement
(LSA) retransmissions for adjacencies belonging to the interface