Release : 1.1f 87 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.49 copy-file
This command copies a file from a source remote site /flash / usb to a destination remote
site/flash/usb.
copy { tftp://ip-address/filename | flash: filename | usb:filename}{
tftp://ipaddress/filename | flash: filename | usb:filename}
Syntax Description
tftp - Copies a log file to a TFTP server
ip-address - IP address or host name of the TFTP server to receive the file
filename - the name assigned to the file on the server
flash: filename - Flash or remote site
usb:filename – File name to be used in external usb memory
Mode
Privileged EXEC Mode
Example
SMIS# copy tftp://12.0.0.2/clclirel flash:clcliser
The filename must be an unquoted text string with the appropriate capitalization, no spaces, and
a maximum length of 32 characters.
The entire copying process may take several minutes and differs from protocol to protocol and
from network to network.
To Next Page
Loading...
