Release : 1.1f 163 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
5.7 logging trap
This command configures the syslog trap level. The no form of this command resets the syslog
trap level to its default value critical.
logging trap [{ <level (0-7)> | alerts | critical | debugging |
emergencies | errors | informational | notification | warnings }]
no logging trap
Syntax Description
trap - Trap messages
Mode
Global Configuration Mode
Defaults
Trap - critical
Example
SMIS(config)# logging trap informational
Related Command
show logging - Displays Logging status and configuration information
To Next Page
Loading...
