Release : 1.1f 625 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.3 ip rip retransmission
This command configures the timeout interval and number of retries to retransmit the update
request packet or an unacknowledged update response packet and the no form of the command
sets the retransmission timeout interval or the number of retransmission retries to its default
value.
ip rip retransmission { interval <timeout-value (5-10)> | retries
<value (10- 40)> }
no ip rip retransmit { interval | retries }
Syntax Description
interval - The timeout interval to be used to retransmit the Update request packet or an
unacknowledged update response packet
retries - The maximum number of retransmissions of the update request and update
response packets
Mode
Router Configuration Mode
Defaults
Interval - 5
Retries - 36
Example
SMIS(config-router)# ip rip retransmission interval 6
During retries, if no response is received then the routes through the next hop router are
marked unreachable.
Related Command
show ip rip – Displays IP RIP protocol database or statistics
To Next Page
Loading...
