Release : 1.1f 747 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.39 shutdown ip bgp
This command sets the BGP Speaker Global Admin status DOWN and the no form of the
command sets the BGP Speaker Global Admin status UP.
shutdown ip bgp
no shutdown ip bgp
Mode
Global Configuration Mode
Example
SMIS(config)# shutdown ip bgp
The shutdown command does not affect all the configurations. All peer sessions go down and
routes learnt through redistribution are lost. If RFD is enabled, then routes history is cleared.
Related Commands
ip bgp overlap-policy – Configures the Overlap Route policy for the BGP Speaker
ip bgp synchronization – Enables synchronization between BGP and IGP
show ip bgp info – Displays the general info about BGP protocol
To Next Page
Loading...
