Release : 1.1f 567 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.31 show ip pim component
This command displays the component information.
show ip pim component [ComponentId <1-255>]
Syntax Description
ComponentId - Component ID
Mode
Privileged EXEC Mode
Example
SMIS# show ip pim component 1
PIM Component Information
---------------------------
Component-Id: 1
PIM Mode
sparse, PIM Version: 2
Elected BSR: 10.0.0.1
Candidate RP Holdtime: 0
Related Commands
ip pim component – Configures the PIM component in the router
ip pim componentId – Adds the interface to the component
To Next Page
Loading...
