Release : 1.1f 863 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.32 ipv6 ospf metric
This command explicitly specifies the metric value for sending a packet on an interface. The no
form of the command sets the default value for the interface metric.
ipv6 ospf metric <1-65535>
no ipv6 ospf metric
Mode
Interface Configuration Mode
Defaults
metric - 10
Example
SMIS(config-if)# ipv6 ospf metric 20
Related Command
show ipv6 ospf interface – Displays the OSPFv3-related interface information
To Next Page
Loading...
