Supermicro SSE-G48-TG4 - Ip Pim Bsr-Candidate

Release : 1.1f 550 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.16 ip pim bsr-candidate
This command sets the preference value for the local interface as a candidate bootstrap router
and the no form of the command sets the default preference value for the local interface as a
candidate bootstrap router.
ip pim bsr-candidate <value (0-255)>
no ip pim bsr-candidate
Mode
Interface Configuration Mode
Defaults
0
Example
iss (config-if)# ip pim bsr-candidate 1
A BSR is a dynamically elected router within a PIM domain.
Related Command
show ip pim bsr – Displays the BSR information