Release : 1.1f 960 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36 LLDP
Link layer discovery protocol (LLDP) helps to learn information about the other devices on the
local network. LLDP enabled devices send out information about their identity and capabilities
periodically. To share different information LLDP supports many types of TLVs.
The list of CLI commands for the configuration of LLDP is as follows:
set lldp
lldp chassis-id-subtype
lldp holdtime-multiplier
lldp notification interval
lldp reinitialization-delay
lldp transmit-interval
lldp tx-delay
clear lldp counters
clear lldp table
lldp notification
lldp port-id-subtype
lldp tlv-select basic-tlv
lldp tlv-select dot1tlv
lldp tlv-select dot3tlv
lldp transmit | receive
debug lldp
show lldp
show lldp errors
show lldp interface
show lldp local
show lldp neighbors
show lldp statistics
To Next Page
Loading...
