Release : 1.1f 641 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.19 ip split-horizon
This command sets the split horizon status and the no form of the command disables the split
horizon status.
ip split-horizon [poisson]
no ip split-horizon
Syntax Description
poisson - Split horizon with poisson reverse is enabled
Mode
Interface Configuration Mode
Example
SMIS(config-if)# ip split-horizon
The value splitHorizon denotes that splitHorizon must be applied in the response packets that are
going out.
Related Command
show ip rip – Displays IP RIP protocol database or statistics
To Next Page
Loading...
