Supermicro SSE-G48-TG4 - Ip Igmp Snooping Report-Forward

Release : 1.1f 310 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.9 ip igmp snooping report-forward
This command specifies if IGMP reports must be forwarded on all ports or router ports of a VLAN
and the no form of the command sets IGMP report-forwarding status to default value.
ip igmp snooping report-forward {all-ports | router-ports}
no ip igmp snooping report-forward
Syntax Description
all-ports - IGMP reports forwarded on all the ports of a VLAN
router-ports - IGMP reports forwarded on router ports of a VLAN
Mode
Global Configuration Mode
Defaults
router-ports
Example
SMIS(config)# ip igmp snooping report-forward all-ports
Related Command
show ip igmp snooping globals - Displays the IGMP snooping information for all VLANs
or a specific VLAN