Release : 1.1f 524 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
20.7 show redistribute-policy
This command displays route redistribution filters.
show redistribute-policy
Mode
Privileged EXEC Mode
Example
SMIS# show redistribute-policy
Destination Range SrcProto DestProto Flag
----------- ----- -------- ----------- ---
0.0.0.0 255.255.255.255 none others Deny
10.0.0.0 255.0.0.0 rip all Allow
Related Commands
redistribute-policy – Adds the permit/Deny Redistribution Policy
default redistribute-policy – Sets the default behavior of RRD Control Table
To Next Page
Loading...
