Supermicro SSE-G48-TG4 - Set Lldp

Release : 1.1f 962 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.1 set lldp
This command enables or disables the LLDP feature.
LLDP feature is disabled by default.
set lldp {enable | disable}
Syntax Description
enable – Enables the LLDP feature
disable – Disables the LLDP feature
Mode
Global Configuration Mode
Defaults
disable
Example
SMIS(config)# set lldp enable
Related Commands
show lldp – Displays the LLDP feature information.