Release : 1.1f 302 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.1 ip igmp snooping
This command enables IGMP snooping in the switch/a specific VLAN and the no form of the
command disables IGMP snooping in the switch/a specific VLAN.
ip igmp snooping
no ip igmp snooping
Mode
Global Configuration Mode / Config-VLAN Mode
Defaults
IGMP snooping is globally disabled
Example
SMIS(config)# ip igmp snooping
SMIS(config-vlan)# ip igmp snooping
When IGMP snooping is enabled globally, it is enabled in all the existing VLAN interfaces. When
IGMP snooping is disabled globally, it is disabled in all the existing VLAN interfaces.
GMRP has to be disabled for the IGMP snooping to be enabled.
Related Commands
shutdown snooping - Shuts down IGMP snooping in the switch
show ip igmp snooping - Displays IGMP snooping information for all VLANs or a specific
VLAN
show ip igmp snooping globals - Displays the IGMP snooping information for all VLANs
or a specific VLAN
snooping multicast-forwarding-mode
– Specifies the snooping multicast forwarding mode
To Next Page
Loading...
