Release : 1.1f 220 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
9.23 show spanning-tree - Summary,
Blockedports, Pathcost
This command displays spanning tree information.
show spanning-tree [{ summary | blockedports | pathcost method }]
Syntax Description
summary - Summary of port states
blockedports - Blocked ports in the system
pathcost method - Pathcost method configured for a bridge
Mode
Privileged EXEC Mode
Defaults
When SMIS boots up, Spanning Tree is enabled by default with MSTP
operating in the switch.
Example
Single Instance:
SMIS# show spanning-tree
Root Id Priority 32768
Address 00:01:02:03:04:01
Cost 0
Port 0 [0]
This bridge is the root
Max age 20 Sec, forward delay 15 Sec
MST00
Spanning tree Protocol Enabled.
S-VLAN Component: MST00 is executing the mstp compatible
Multiple Spanning Tree
Protocol
Bridge Id Priority 32768
Address 00:01:02:03:04:01
Max age is 20 sec, forward delay is 15 sec
Name Role State Cost Prio Type
To Next Page
Loading...
