Supermicro SSE-G48-TG4 - Show Lldp Local

Release : 1.1f 982 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.20 show lldp local
This command displays LLDP interface configuration and TLV information.
show lldp local {[<interface-type> <interface-id>] | [mgmt-addr]}
Syntax Description
interface-type - Interface type, can either be a gi, ex or qx
interface-id - Physical interface ID including slot and port number.
mgmt-addr – Management address
Mode
Privileged/User EXEC Mode
Defaults
Example
SMIS# show lldp local gi 0/1
Related Commands
show lldp – Displays the LLDP information
show lldp errors – Displays the LLDP errors
show lldp interface – Displays the LLDP interface information
show lldp neighbor – Displays the LLDP neighbor table
show lldp statistics – Displays the LLDP statistics
show lldp traffic – Displays the LLDP traffic counters