Release : 1.1f 213 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
9.17 spanning-tree mst- Properties of an interface
for MSTP
This command sets the spanning tree properties of an interface for MSTP and the no form of the
command sets the spanning tree properties of an interface to default value.
spanning-tree mst <instance-id(1-64)> { cost <value(1-200000)>| port-
priority <value(0-240)> | disable }
no spanning-tree mst <instance-id(1-64)>{cost|port-priority | disable}
Syntax Description
cost - The cost value associated with the port
port-priority - Port priority value
disable - Disables the spanning tree on the port
Mode
Interface Configuration Mode
Defaults
cost - 2000000
port-priority - 128
Example
SMIS(config-if)#spanning-tree mst 2 cost 4000
MST instance must exist, for this command If all interfaces have the same priority value, the MST
puts the interface with the lowest interface number in the forwarding state and blocks other
interfaces
Related Command
show spanning-tree mst - CIST or specified mst Instance- Displays the
spanning tree properties of an interface for an MSTP instance
To Next Page
Loading...
