Release : 1.1f 184 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
8.1 set rmon
This command is used to enable or disable the RMON feature.
set rmon {enable | disable}
Syntax Description
enable - Enables the RMON feature in the system
disable - Disables the RMON feature in the system
Mode
Global Configuration Mode
Defaults
The RMON Module is disabled by default
Example
SMIS(config)# set rmon enable
All the other RMON Module commands can be executed only when the RMON Module is
enabled. Fatal error messages are displayed when commands are executed without
enabling the RMON feature.
Related Command
show rmon - Successful execution of this command without any messages indicates that
RMON feature is enabled in the system
To Next Page
Loading...
