Release : 1.1f 436 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.15 lease
This command configures the duration of the lease for an IP address that is assigned from ISS
Dynamic
Host Configuration Protocol (DHCP) Server to a DHCP client. The no form of this command
restores the default value of 3600 seconds.
lease { <days (0-365)> [<hours (0-23)> [<minutes (0-59)>]] | infinite }
no lease
Syntax Description
days - Duration of the lease in number of days
hours - Number of hours in lease
minutes - Number of minutes in lease
infinite - Duration of the lease is unlimited
Mode
DHCP Pool Configuration Mode
Defaults
3600 seconds
Example
SMIS(dhcp-config)# lease 1
Related Commands
service dhcp-server - Enables the DHCP server
show ip dhcp server information - Displays the server information
show ip dhcp server pools - Displays the DHCP server pools
show ip dhcp server binding - Displays the DHCP server binding information
show ip dhcp server statistics - Displays the DHCP server statistics
To Next Page
Loading...
