Supermicro SSE-G48-TG4 - Ip Rip Send Version

Release : 1.1f 637 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.15 ip rip send version
This command sets the IP RIP version number for transmitting advertisements and the no form of
the command sets IP RIP send version number to its default value.
ip rip send version { 1 | 2 | 1 2 | none }
no ip rip send version
Syntax Description
1 | 2 | 1 2 | none - Indicates which version of RIP updates are to be sent
Mode
Interface Configuration Mode
Defaults
1 2
Example
SMIS(config-if)# ip rip send version 1
1 implies sending RIP updates compliant with RFC 1058. 2 implies multicasting RIP
updates. 1 2 implies both 1 & 2.
Related Commands
ip rip receive version – Sets IP RIP version number for receiving advertisements
show ip rip – Displays IP RIP protocol database or statistics