Release : 1.1f 756 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.45 show ip bgp summary
This command displays the status of all BGP4 connections.
show ip bgp summary
Mode
Privileged EXEC Mode
Example
SMIS# show ip bgp summary
BGP router identifier is 10.0.0.1, local AS number 100
BGP table version is 5
Neighbor Version AS MsgRcvd MsgSent Up/Down State/PfxRcd
--------- ------- -- ------- ------- ------- ------------
10.0.0.2 4 200 44 56 00:00:21:26 Established
10.0.0.3 4 100 0 0 - Idle
10.0.0.4 4 100 0 0 - Idle
10.0.0.6 4 600 0 0 - Connect
10.0.0.7 4 700 0 0 - Connect
10.0.0.8 4 800 0 0 - Connect
BGP Speaker Local AS number must be configured.
Related Commands
router bgp– Sets the AS number of the BGP Speaker
ip bgp dampening – Configures the Dampening Parameters
ip bgp overlap-policy– Configures the Overlap Route policy for the BGP Speaker
bgp router-id – Configures the BGP Identifier of the BGP Speaker
bgp default local-preference – Configures the Default Local Preference value
neighbor - remote-as – Creates a Peer and initiates the connection to the peer
no ip bgp overlap-policy – Resets the Overlap route policy to default
To Next Page
Loading...
