Supermicro SSE-G48-TG4 - DHCP Server; Service Dhcp-Server

Release : 1.1f 419 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3 DHCP Server
16.3.1 service dhcp-server
This command enables the DHCP server. The no form of this command disables the DHCP
server.
service dhcp-server
no service dhcp-server
Mode
Global Configuration Mode
Defaults
Disabled
Example
iss (config)# service dhcp-server
DHCP Relay must be disabled before enabling the DHCP server.
Related Command
show ip dhcp server information - Displays the DHCP server information