Release : 1.1f 876 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.43 show ipv6 ospf virtual-links
This command displays the parameters and the current state of OSPFv3 virtual links.
show ipv6 ospf virtual-links
Mode
User/Privileged EXEC Mode
Example
SMIS# show ipv6 ospf virtual-links
Interface State: PointToPoint, Neighbor State: FULL
Transit Area: 2.2.2.2, Virtual Neighbor: 11.0.0.7
Intervals Configured for the Virtual Interface:
Hello: 10, Dead: 60, Transit: 1, Retransmit : 20
Related Command
area - virtual-link – Sets the Virtual Link between Areas
To Next Page
Loading...
