Supermicro SSE-G48-TG4 - Cosq Scheduling Algorithm

Release : 1.1f 897 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
32.8 cosq scheduling algorithm
This command sets the cosq scheduling algorithm. The no form of this command configures the
scheduling algorithm to its default value strict.
cosq scheduling algorithm { strict | rr | wrr | deficit }
no cosq scheduling algorithm
Syntax Description
strict - strict
rr - round robin
wrr - weighted round robin
deficit - deficit
Mode
Interface Configuration mode
Default
strict
Example
SMIS(config-if)# cosq scheduling algorithm strict
Related Commands
show cosq algorithm - Displays the CoSq algorithm used for the interface.
show cosq weights-bw - Displays the CoSq weights and the bandwidth for the interface.