Supermicro SSE-G48-TG4 - No Ipv6 Pim Interface

Release : 1.1f 593 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.21 no ipv6 pim interface
This command deletes the IPv6 PIM Interface, that is, this command is used to destroy the
interface at PIMv6.
no ipv6 pim interface
Mode
Interface Configuration Mode
Example
iss (config-if)# no ipv6 pim interface
Related Command
show ipv6 pim interface – Displays the PIMv6 interfaces of the router