Supermicro SSE-G48-TG4 - Show Ip Igmp Groups

Release : 1.1f 511 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.14 show ip igmp groups
This command displays the IGMP groups information.
show ip igmp groups
Mode
Privileged EXEC Mode
Example
SMIS# show ip igmp groups
I - Include Mode
E - Exclude Mode
S - Static Mbr, D - Dynamic Mbr
GroupAddress Flg Iface UpTime ExpiryTime LastReporter
--------------- ------- ----------------------- ---------------
224.5.5.5 S vlan2 [0d 00:00:22.28] [0d 00:00:00.00] 20.0.0.1
226.7.7.7 IS vlan3 [0d 00:00:04.59] [0d 00:00:00.00] 30.0.0.1
Related Commands
ip igmp static-group - Adds the static group membership on the interface