Release : 1.1f 867 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.36 ipv6 ospf neighbor probing
This command enables neighbor probing on demand-circuit enabled interface. The no form of the
command disables neighbor probing on demand-circuit enabled interface.
ipv6 ospf neighbor probing
no ipv6 ospf neighbor probing
Mode
Interface Configuration Mode
Defaults
Disabled
Example
SMIS(config-if)# ipv6 ospf neighbor probing
Related Command
show ipv6 ospf interface – Displays the OSPFv3-related interface information
To Next Page
Loading...
