Release : 1.1f 839 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.11 ASBR Router
This command configures the router as an ASBR. The no form of the command disables the
ASBR status of the router.
ASBR Router
no ASBR Router
Mode
Router Configuration Mode
Example
SMIS(config-router)# ASBR Router
Only when ASBR (Autonomous System Border Router) status is configured to enable, routes
from other protocols are redistributed into OSPFv3 domain.
Related Command
show ipv6 ospf - General Information – Displays general information about the
OSPFv3 routing process
To Next Page
Loading...
