Release : 1.1f 661 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.13 ASBR Router
This command specifies this router as ASBR. The no form of the command disables this router as
ASBR.
ASBR Router
no ASBR Router
Mode
Router Configuration Mode
Example
SMIS(config-router)# ASBR Router
Routers that act as gateways (redistribution) between OSPF and other routing protocols (IGRP,
EIGRP, RIP, BGP, Static) or other instances of the OSPF routing process are called autonomous
system boundary router (ASBR).
Related Commands
set nssa asbr-default-route translator – Enables/disables setting of P bit in the
default Type-7 LSA generated by NSSA internal ASBR
show ip ospf info – Displays general information about the OSPF routing process
To Next Page
Loading...
